Pinch pleats are more gathered than other headings and have permanent sewn-in pleats for a more luxurious look. It is also called Double Pleated.
Panel width is the width that pleats already set. 200% fabric width is used for pleats.
It works for the track, traverse rod, channel rod, and pole with rings.
Comes with adjustable plastic pin hooks.
PINCH PLEAT WITH BACK TAB
A classic pleat pleat style with back tab.
Normally, the tab height is 8cm, fitting for rods with a diameter of 1.5 inches and below.
Comes with adjustable plastic pin hooks.
Can be hung on rings or rod directly. Pay attention to height measurement due to 2 different ways of hanging.
TAILOR PLEAT
Tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
Pleats space apart 5.5-6.5 inches.
Pleats adjustable pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
Panel width is the width that pleats already set. 200% fabric width is used for pleats.
Metal pin hooks are not included. Only adjustable pin hooks are included.
Length is measured from the eyelet ring where the curtain hooks are attached to floor.
If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
It works for the track, traverse rod, channel rod, and pole with rings.
TRIPLE PLEAT
Triple pleats are more gathered than pinch pleats and have permanent sewn-in pleats for a more luxurious look.
Panel width is the width that pleats already set. 230% fabric width is used for pleats.
It works for the track, traverse rod, channel rod, and pole with rings.
Comes with adjustable plastic pin hooks.
TRIPLE TAILOR PLEAT
Triple tailor pleats are more gathered than other headings and have permanent sewn-in pleats.
Pleats space apart 5.5 inches.
Pleats adjustable pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
Panel width is the width that pleats already set. 230% fabric width is used for pleats.
Metal pin hooks are not included. Only adjustable pin hooks are included.
Length is measured from the eyelet ring where the curtain hooks are attached to floor.
If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
It works for the track, traverse rod, channel rod, and pole with rings.
FRENCH PLEAT
Fabric is gathered tightly into folds that resemble the size and shape of a row of pencils.
In classic and versatile style, achieved by sewing a tape into the top of the curtain fabric, which is then drawn up using cords to create even pleats.
220% fabric width is used for pleats and folds to create the finished width you order.
Suits for pure linen drapery.
GOBLET
Goblet pleats are more gathered than other headings and have permanent sewn-in pleats.
Pleats space apart 5.5 inches.
Pleats metal pin hooks quantity: 10 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 27 for 150 in width.
Panel width is the width that goblet pleats already are made. 200% fabric width is used for pleats.
Metal pin hooks are included.
Length is measured from the eyelet ring where the curtain hooks are attached to floor.
If rod or track length is 100 inches, then order 1 panel 100 inches width or 2 panels each 50 inches width.
It works for the track, traverse rod, channel rod, and pole with rings.
INVERTED BOX PLEAT
It is formed by two equal folds of fabric folded toward one another so they meet at the center of the pleat on the front of the fabric. It is what a box pleat looks like from behind.
Pleats space distance 5 inches.
Side hem 1 inch, bottom hem 3 1/8 inches.
S-shaped metal pin hook included.
Panel width is the width that pleats already set. 200% fabric width is used for pleats and folds to create 100% finished width you order.
Measure length from the eye ring to the bottom. Rod rings are not included, which are purchased separately.
9 pleats for 50 in width, 13 pleats for 72 in width, 15 pleats for 84 in width, 19 pleats for 100 in width, 21 pleats for 110 in width, 23 pleats for 120 in width, 29 for 150 inwidth.
If rod length is 100 inches, order 2 panels each 50 inches width.
It works for rods with rings and track.
Hanging Header Style
SOFT TOP
4-IN-1
Versatile 4-in-1 construction: Hook Belt, Rod Pocket, Back Tab and Clip Ring.
3 inches rod pocket size.
Hook belt metal pin hook in 3 inches. 6 pin hooks per 40 inches width. Hooks included.
Side hem 1 inch, bottom hem 3 1/8 inches.
Measure length from the ring eyelet or top of the pole to bottom. Rod clip rings are not included.
If rod length is 100 inches, multiply by 150-200% width for folds, then order 2 panels each 75-100 inches wide.
It works for rods with rings, rod with clip rings and pole.
If rod length is 100 inches, consider 150-200% fullness to order more width for folds, order 2 panels each 75-100 inches wide.
It works for rod with rings.
TAB TOP
Tab height 4 inches, 6 tabs per 40 inches.
Side hem 1 inch, bottom hem 3-1/8 inches.
Curtain length is measured from the top of the pole to floor.
If rod length is 100 inches, consider fullness 120-200% width for folds, order 2 panels each 60-100 inches wide.
Velcro tab top allow to remove and install easily, and it is optional for outdoor curtains or room divider.
It works for rod.
ROD POCKET
Pocket 3 inches. Top flange is optional.
Side hem 1 inch, bottom hem 3-1/8 inches.
If rod length is 100 inches, consider 150% width for fullness, folds, order 2 panels each 75 inches wide.
It works for rod or rod with clip rings.
Rod Pocket with Header
The rod pocket measures 3 inches, with an optional top header (flange) measuring 1 inch for added detail.
Side hem is 0.5 inches, and the bottom hem is 2 inches for a polished look.
To achieve ideal fullness and graceful folds, we recommend a panel width that is 200% of the rod length. For example, if your rod length is 100 inches, order 2 panels, each 100 inches wide.
Suitable for use with both standard rods and rods with clip rings, offering flexible styling options.
BACK TAB
Tab height 4 inches. Pocket size 3 inches.
6 tabs per 40 in width, 8 tabs for 50 in width, 10 tabs for 72 in width, 12 tab for 84 in width, 15 tabs for 100 in width.
Side hem 1 inch, bottom hem 3-1/8 inches.
If rod length is 100 inches, order 200% fullness width for folds, then order 2 panels each 100 inches wide.
It works for rod or rod with clip rings.
Choosing a selection results in a full page refresh.
